Chapter 21. Examples, Tutorials, Case Studies

This chapter outlines the examples that come with Esper in the examples folder of the distribution. Each sample is in a separate folder that contains all files needed by the example, excluding jar files.

Here is an overview over the examples in alphabetical order:

Table 21.1. Examples

Name	Description
Section 21.3, “AutoID RFID Reader”	An array of RFID readers sense RFID tags as pallets are coming within the range of one of the readers. Shows the use of an XSD schema and XML event representation. A single statement shows a rolling time window, a where-clause filter on a nested property and a group-by.
Section 21.6, “Market Data Feed Monitor”	Processes a raw market data feed and reports throughput statistics and detects when the data rate of a feed falls off unexpectedly. Demonstrates a batch time window and a rolling time window with a having-clause. Multi-threaded example with a configurable number of threads and a simulator for generating feed data.
Section 21.12, “MatchMaker”	In the MatchMaker example every mobile user has an X and Y location and the task of the event patterns created by this example is to detect mobile users that are within proximity given a certain range, and for which certain properties match preferences. Dynamically creates and removes event patterns that use range matching based on mobile user events received.
Section 21.13, “Named Window Query”	A mini-benchmark that handles temperature sensor events. The sample creates a named window and fills it with a large number of events. It then executes a large number of pre-defined queries as well as fire-and-forget queries and reports times. Study this example if you are interested in named windows, Map event type representation, fire-and-forget queries as well as pre-defined queries via on-select, and the performance aspects.
Section 21.14, “Sample Virtual Data Window”	This example demonstrates the use of virtual data window to expose a (large) external data store, without any need to keep events in memory, and without sacrificing query performance.
Section 21.15, “Sample Cycle Detection”	This example showcases the aggregation multi-function extension API for use with a cycle-detection problem detecting cycles in transactions between accounts.
Section 21.7, “OHLC Plug-in View”	A plug-in custom view addressing a problem in the financial space: Computes open-high-low-close bars for minute-intervals of events that may arrive late, based on each event's timestamp. A custom plug-in view based on the extension API can be a convenient and reusable way to express a domain-specific analysis problem as a unit, and this example includes the code for the OHLC view factory and view as well as simulator to test the view.
Section 22.3, “Using the performance kit”	A benchmark that is further described in the performance section of this document under performance kit.
Section 21.16, “Quality of Service”	This example develops some code for measuring quality-of-service levels such as for a service-level agreement (SLA). This example combines patterns with select-statements, shows the use of the timer `'at'` operator and followed-by operator `->`, and uses the iterator API to poll for current results.
Section 21.10, “Assets Moving Across Zones - An RFID Example”	An example out of the RFID domain processes location report events. The example includes a simple Swing-based GUI for visualization allows moving tags from zone to zone visually. It also a contains comprehensive simulator to generate data for a large number of asset groups and their tracking. The example hooks up statements that aggregate and detect patterns in the aggregated data to determine when an asset group constraint is violated.
Section 21.4, “Runtime Configuration”	Example code to demonstrate various key runtime configuration options such as adding event types on-the-fly, adding new variables, adding plug-in single-row and aggregation functions and adding variant streams and revision type definition.
Section 21.5, “JMS Server Shell and Client”	The server shell is a Java Messaging Service (JMS) -based server and client that send and listens to messages on a JMS destination. It also demonstrates a simple Java Management Extension (JMX) MBean for remote statement management. A single EPL statement computes an average duration for each IP address on a rolling time window and outputs a snapshot every 2 seconds.
Section 21.11, “StockTicker”	An example from the financial domain that features event patterns to filter stock tick events based on price and symbol. The example is designed to provide a high volume of events and includes multithreaded unit test code as well as a simulting data generator. Perhaps this is a good example to learn the API and get started with event patterns. The example dynamically creates and removes event patterns based on price limit events received.
Section 21.9, “Self-Service Terminal”	A J2EE-based self-service terminal managing system in an airport that gets a lot of events from connected terminals. Contains a message-driven bean (EJB-MDB) for use in a J2EE container, a client and a simulator, as well as EPL statements for detecting various conditions. A version that runs outside of a J2EE container is also available.
Section 21.17, “Trivia Geeks Club”	Trivia Geeks Club demonstrates EPL for a scoring system computing scores in a trivia game.

21.2. Running the Examples

In order to compile and run the samples please follow the below instructions:

Make sure Java 1.6 or greater is installed and the JAVA_HOME environment variable is set.
Open a console window and change directory to examples/example_name/etc.
Run "setenv.bat" (Windows) or "setenv.sh" (Unix) to verify your environment settings.
Run "compile.bat" (Windows) or "compile.sh" (Unix) to compile an example.
Now you are ready to run an example. Some examples require mandatory parameters that are also described in the file "readme.txt" in the "etc" folder.
Modify the logger logging level in the "log4j.xml" configuration file changing DEBUG to INFO on a class or package level to control the volume of text output.

Each example also provides Eclipse project .classpath and .project files. The Eclipse projects expect an esper_runtime user library that includes the runtime dependencies.

JUnit tests exist for the example code. The JUnit test source code for the examples can be found in each example's src/test folder. To build and run the example JUnit tests, use the Maven 2 goal test.

21.3. AutoID RFID Reader

In this example an array of RFID readers sense RFID tags as pallets are coming within the range of one of the readers. A reader generates XML documents with observation information such as reader sensor ID, observation time and tags observed. A statement computes the total number of tags per reader sensor ID within the last 60 seconds.

This example demonstrates how XML documents unmarshalled to org.w3c.dom.Node DOM document nodes can natively be processed by the engine without requiring Java object event representations. The example uses an XPath expression for an event property counting the number of tags observed by a sensor. The XML documents follow the AutoID (http://www.autoid.org/) organization standard.

The classes for this example can be found in package com.espertech.esper.example.autoid. As events are XML documents with no Java object representation, the example does not have event classes.

A simulator that can be run from the command line is also available for this example. The simulator generates a number of XML documents as specified by a command line argument and prints out the totals per sensor. Run "run_autoid.bat" (Windows) or "run_autoid.sh" (Unix) to start the AutoID simulator. Please see the readme file in the same folder for build instructions and command line parameters.

The code snippet below shows the simple statement to compute the total number of tags per sensor. The statement is created by class com.espertech.esper.example.autoid.RFIDTagsPerSensorStmt.

select ID as sensorId, sum(countTags) as numTagsPerSensor
from AutoIdRFIDExample#time(60 seconds)
where Observation[0].Command = 'READ_PALLET_TAGS_ONLY'
group by ID

21.4. Runtime Configuration

This example demonstrates various key runtime configuration options such as adding event types on-the-fly, adding new variables, adding plug-in single-row and aggregation functions and adding variant streams and revision type definition.

The classes for this example live in package com.espertech.esper.example.runtimeconfig.

21.5. JMS Server Shell and Client

21.6. Market Data Feed Monitor

This example processes a raw market data feed. It reports throughput statistics and detects when the data rate of a feed falls off unexpectedly. A rate fall-off may mean that the data is stale and we want to alert when there is a possible problem with the feed.

The classes for this example live in package com.espertech.esper.example.marketdatafeed. Run "run_mktdatafeed.bat" (Windows) or "run_mktdatafeed.sh" (Unix) in the examples/etc folder to start the market data feed simulator.

21.6.1. Input Events

The input stream consists of 1 event stream that contains 2 simulated market data feeds. Each individual event in the stream indicates the feed that supplies the market data, the security symbol and some pricing information:

String symbol;
FeedEnum feed;
double bidPrice;
double askPrice;

21.6.2. Computing Rates Per Feed

For the throughput statistics and to detect rapid fall-off we calculate a ticks per second rate for each market data feed.

We can use an EPL statement that specifies a view onto the market data event stream that batches together 1 second of events. We specify the feed and a count of events per feed as output values. To make this data available for further processing, we insert output events into the TicksPerSecond event stream:

insert into TicksPerSecond
select feed, count(*) as cnt 
  from MarketDataEvent#time_batch(1 second) 
 group by feed

21.6.3. Detecting a Fall-off

We define a rapid fall-off by alerting when the number of ticks per second for any second falls below 75% of the average number of ticks per second over the last 10 seconds.

We can compute the average number of ticks per second over the last 10 seconds simply by using the TicksPerSecond events computed by the prior statement and averaging the last 10 seconds. Next, we compare the current rate with the moving average and filter out any rates that fall below 75% of the average:

select feed, avg(cnt) as avgCnt, cnt as feedCnt 
  from TicksPerSecond#time(10 seconds)
 group by feed 
having cnt < avg(cnt) * 0.75

21.6.4. Event generator

The simulator generates market data events for 2 feeds, feed A and feed B. The first parameter to the simulator is a number of threads. Each thread sends events for each feed in an endless loop. Note that as the Java VM garbage collection kicks in, the example generates rate drop-offs during such pauses.

The second parameter is a rate drop probability parameter specifies the probability in percent that the simulator drops the rate for a randomly chosen feed to 60% of the target rate for that second. Thus rate fall-off alerts can be generated.

The third parameter defines the number of seconds to run the example.

21.7. OHLC Plug-in View

This example contains a fully-functional custom view based on the extension API that computes OHLC open-high-low-close bars for events that provide a long-typed timestamp and a double-typed value.

OHLC bar is a problem out of the financial domain. The "Open" refers to the first datapoint and the "Close" to the last datapoint in an interval. The "High" refers to the maximum and the "Low" to the minimum value during each interval. The term "bar" is used to describe each interval results of these 4 values.

The example provides an OHLC view that is hardcoded to 1-minute bars. It considers the timestamp value carried by each event, and not the system time. The cutoff time after which an event is no longer considered for a bar is hardcoded to 5 seconds.

The view assumes that events arrive in timestamp order: Each event's timestamp value is equal to or higher then the timestamp value provided by the prior event.

The view may also be used together with std:groupwin to group per criteria, such as symbol. In this case the assumption of timestamp order applies per symbol.

The view gracefully handles no-event and late-event scenarios. Interval boundaries are defined by system time, thus event timestamp and system time must roughly be in-sync, unless using external timer events.

21.8. Transaction 3-Event Challenge

The classes for this example live in package com.espertech.esper.example.transaction. Run "run_txnsim.bat" (Windows) or "run_txnsim.sh" (Unix) to start the transaction simulator. Please see the readme file in the same folder for build instructions and command line parameters.

21.8.1. The Events

The use case involves tracking three components of a transaction. It‘s important that we use at least three components, since some engines have different performance or coding for only two events per transaction. Each component comes to the engine as an event with the following fields:

Transaction ID
Time stamp

In addition, we have the following extra fields:

In event A:

Customer ID

In event C:

Supplier ID (the ID of the supplier that the order was filled through)

21.8.2. Combined event

We need to take in events A, B and C and produce a single, combined event with the following fields:

Transaction ID
Customer ID
Time stamp from event A
Time stamp from event B
Time stamp from event C

What we‘re doing here is matching the transaction IDs on each event, to form an aggregate event. If all these events were in a relational database, this could be done as a simple SQL join… except that with 10,000 events per second, you will need some serious database hardware to do it.

21.8.3. Real time summary data

Further, we need to produce the following:

Min,Max,Average total latency from the events (difference in time between A and C) over the past 30 minutes.
Min,Max,Average latency grouped by (a) customer ID and (b) supplier ID. In other words, metrics on the the latency of the orders coming from each customer and going to each supplier.
Min,Max,Average latency between events A/B (time stamp of B minus A) and B/C (time stamp of C minus B).

21.8.4. Find problems

We need to detect a transaction that did not make it through all three events. In other words, a transaction with events A or B, but not C. Note that, in this case, what we care about is event C. The lack of events A or B could indicate a failure in the event transport and should be ignored. Although the lack of an event C could also be a transport failure, it merits looking into.

21.8.5. Event generator

To make testing easier, standard and to demonstrate how the example works, the example is including an event generator. The generator generates events for a given number of transactions, using the following rules:

One in 5,000 transactions will skip event A
One in 1,000 transactions will skip event B
One in 10,000 transactions will skip event C.
Transaction identifiers are randomly generated
Customer and supplier identifiers are randomly chosen from two lists
The time stamp on each event is based on the system time. Between events A and B as well as B and C, between 0 and 999 is added to the time. So, we have an expected time difference of around 500 milliseconds between each event
Events are randomly shuffled as described below

To make things harder, we don‘t want transaction events coming in order. This code ensures that they come completely out of order. To do this, we fill in a bucket with events and, when the bucket is full, we shuffle it. The buckets are sized so that some transactions‘ events will be split between buckets. So, you have a fairly randomized flow of events, representing the worst case from a big, distributed infrastructure.

The generator lets you change the size of the bucket (small, medium, large, larger, largerer). The larger the bucket size, the more events potentially come in between two events in a given transaction and so, the more the performance characteristics like buffers, hashes/indexes and other structures are put to the test as the bucket size increases.

21.9. Self-Service Terminal

The example is about a J2EE-based self-service terminal managing system in an airport that gets a lot of events from connected terminals. The event rate is around 500 events per second. Some events indicate abnormal situations such as 'paper low' or 'terminal out of order'. Other events observe activity as customers use a terminal to check in and print boarding tickets.

21.9.1. Events

Each self-service terminal can publish any of the 6 events below.

Checkin - Indicates a customer started a check-in dialog
Cancelled - Indicates a customer cancelled a check-in dialog
Completed - Indicates a customer completed a check-in dialog
OutOfOrder - Indicates the terminal detected a hardware problem
LowPaper - Indicates the terminal is low on paper
Status - Indicates terminal status, published every 1 minute regardless of activity as a terminal heartbeat

All events provide information about the terminal that published the event, and a timestamp. The terminal information is held in a property named "term" and provides a terminal id. Since all events carry similar information, we model each event as a subtype to a base class BaseTerminalEvent, which will provide the terminal information that all events share. This enables us to treat all terminal events polymorphically, that is we can treat derived event types just like their parent event types. This helps simplify our queries.

All terminals publish Status events every 1 minute. In normal cases, the Status events indicate that a terminal is alive and online. The absence of status events may indicate that a terminal went offline for some reason and that may need to be investigated.

21.9.2. Detecting Customer Check-in Issues

A customer may be in the middle of a check-in when the terminal detects a hardware problem or when the network goes down. In that situation we want to alert a team member to help the customer. When the terminal detects a problem, it issues an OutOfOrder event. A pattern can find situations where the terminal indicates out-of-order and the customer is in the middle of the check-in process:

select * from pattern [ every a=Checkin -> 
      ( OutOfOrder(term.id=a.term.id) and not 
          (Cancelled(term.id=a.term.id) or Completed(term.id=a.term.id)) )]

21.9.3. Absence of Status Events

Since Status events arrive in regular intervals of 60 seconds, we can make us of temporal pattern matching using timer to find events that didn't arrive. We can use the every operator and timer:interval() to repeat an action every 60 seconds. Then we combine this with a not operator to check for absence of Status events. A 65 second interval during which we look for Status events allows 5 seconds to account for a possible delay in transmission or processing:

select 'terminal 1 is offline' from pattern 
  [every timer:interval(60 sec) -> (timer:interval(65 sec) and not Status(term.id = 'T1'))]
output first every 5 minutes

21.9.4. Activity Summary Data

By presenting statistical information about terminal activity to our staff in real-time we enable them to monitor the system and spot problems. The next example query simply gives us a count per event type every 1 minute. We could further use this data, available through the CountPerType event stream, to join and compare against a recorded usage pattern, or to just summarize activity in real-time.

insert into CountPerType
select type, count(*) as countPerType 
from BaseTerminalEvent#time(10 minutes) 
group by type
output all every 1 minutes

21.9.5. Sample Application for J2EE Application Server

The example code in the distribution package implements a message-driven enterprise java bean (MDB EJB). We used an MDB as a convenient place for processing incoming events via a JMS message queue or topic. The example uses 2 JMS queues: One queue to receive events published by terminals, and a second queue to indicate situations detected via EPL statement and listener back to a receiving process.

This example has been packaged for deployment into a JBoss Java application server (see http://www.jboss.org) with default deployment configuration. JBoss is an open-source application server available under LGPL license. Of course the choice of application server does not indicate a requirement or preference for the use of Esper in a J2EE container. Other quality J2EE application servers are available and perhaps more suitable to run this example or a similar application.

The complete example code can be found in the "examples/terminalsvc" folder of the distribution. The standalone version that does not require a J2EE container is in "examples/terminalsvc-jse".

21.9.5.1. Running the Example

The pre-build EAR file contains the MDB for deployment to a JBoss application server with default deployment options. The JBoss default configuration provides 2 queues that this example utilizes: queue/A and queue/B. The queue/B is used to send events into the MDB, while queue/A is used to indicate back the any data received by listeners to EPL statements.

The application can be deployed by copying the ear file in the "examples/terminalsvc/terminalsvc-ear" folder to your JBoss deployment directory located under the JBoss home directory under "standalone/deployments".

The example contains an event simulator and an event receiver that can be invoked from the command line. See the folder "examples/terminalsvc/etc" folder readme file and start scripts for Windows and Unix, and the documentation set for further information on the simulator.

21.9.5.2. Building the Example

This example requires Maven 2 to build. To build the example, change directory to the folder "examples/terminalsvc" and type "mvn package". The instructions have been tested with JBoss AS 7.1.1 and Maven 3.0.4.

The Maven build packages the EAR file for deployment to a JBoss application server with default deployment options.

21.9.5.3. Running the Event Simulator and Receiver

The example also contains an event simulator that generates meaningful events. The simulator can be run from the directory "examples/terminalsvc/etc" via the command "run_terminalsvc_sender.bat" (Windows) and "run_terminalsvc_sender.sh" (Linux). The event simulator generates a batch of at least 200 events every 1 second. Randomly, with a chance of 1 in 10 for each batch of events, the simulator generates either an OutOfOrder or a LowPaper event for a random terminal. Each batch the simulator generates 100 random terminal ids and generates a Checkin event for each. It then generates either a Cancelled or a Completed event for each. With a chance of 1 in 1000, it generates an OutOfOrder event instead of the Cancelled or Completed event for a terminal.

The event receiver listens to the MDB-outcoming queue for alerts and prints these out to console. The receiver can be run from the directory "examples/terminalsvc/etc" via the command "run_terminalsvc_receiver.bat" (Windows) and "run_terminalsvc_receiver.sh" (Linux). Before running please copy the jboss-client.jar file from your JBoss AS installation bin directory to the "terminalsvc/lib" folder.

The receiver and sender code use "guest" as user and "pass" as password. Add the "guest" user using the Jboss "add-user" script and assign the role "guest". Your JBoss server may need to start with "-c standalone-full.xml" to have the messaging subsystem available.

Add queue configurations to the messaging subsystem configuration as follows:

<jms-queue name="queue_a">
  <entry name="queue_a"/>
  <entry name="java:jboss/exported/jms/queue/queue_a"/>
</jms-queue>
<jms-queue name="queue_b">
  <entry name="queue_b"/>
  <entry name="java:jboss/exported/jms/queue/queue_b"/>
</jms-queue>

Disable persistence in the messaging subsystem for this example so we are not running out of disk space:

<persistence-enabled>false</persistence-enabled>

21.10. Assets Moving Across Zones - An RFID Example

This example out of the RFID domain processes location report events. Each location report event indicates an asset id and the current zone of the asset. The example solves the problem that when a given set of assets is not moving together from zone to zone, then an alert must be fired.

Each asset group is tracked by 2 statements. The two statements to track a single asset group consisting of assets identified by asset ids {1, 2, 3} are as follows:

insert into CountZone_G1
select 1 as groupId, zone, count(*) as cnt
from LocationReport(assetId in 1, 2, 3)#unique(assetId)
group by zone

select Part.zone from pattern [
  every Part=CountZone_G1(cnt in (1,2)) ->
    (timer:interval(10 sec)  and not CountZone_G1(zone=Part.zone, cnt in (0,3)))]

The classes for this example can be found in package com.espertech.esper.example.rfid.

This example provides a Swing-based GUI that can be run from the command line. The GUI allows drag-and-drop of three RFID tags that form one asset group from zone to zone. Each time you move an asset across the screen the example sends an event into the engine indicating the asset id and current zone. The example detects if within 10 seconds the three assets do not join each other within the same zone, but stay split across zones. Run "run_rfid_swing.bat" (Windows) or "run_rfid_swing.sh" (Unix) to start the example's Swing GUI.

The example also provides a simulator that can be run from the command line. The simulator generates a number of asset groups as specified by a command line argument and starts a number of threads as specified by a command line argument to send location report events into the engine. Run "run_rfid_sim.bat" (Windows) or "run_rfid_sim.sh" (Unix) to start the RFID location report event simulator. Please see the readme file in the same folder for build instructions and command line parameters.